CLAMP-ON ULTRASONIC FLOW METERS
The SLF Series of clamp-on ultrasonic liquid flow meters are the solution for non-invasive flow measurement, for corrosive fluids where material compatibility is an issue, and for sanitary environments. These meters are installed on the outside of the existing piping and use the ultrasonic transit time method to determine the flow rate. The meters can be installed on 3/8 to 12-inch line sizes.
SLF-500
For larger industrial piping up to 12 inches in diameter
The SLF-500 ultrasonic liquid flow meter is an accurate, reliable and cost-effective clamp-on flow measurement instrument capable of measuring bidirectional flow through metal, plastic and even lined pipes without altering the piping. Ideal meter for applications where it is preferable not to have an instrument exposed to the process fluid.
QUICK SPECS
- Designed for industrial piping from 1 to 12 inches.
- Accuracy: ±2% of reading from 3.3 to 33 ft/sec
- Repeatability: ±0.2%
- Temperature range: -4° to 140° F
- Outputs: 1 analog, 3 open collector
- Electronics: Wall mount, IP65
KEY BENEFITS
SLF-200
For industrial piping up to 6 inches in diameter
The SLF-200 Series ultrasonic clamp-on flow meter is an accurate, reliable and cost-effective non-invasive flow measurement instrument capable of measuring flow through metal, plastic and various other pipe material without altering the piping. Ideal installation where it is preferable not to have an instrument exposed to the process fluid.
QUICK SPECS
- Designed for industrial piping from 1 to 6 inches.
- Accuracy: ±2% of reading from 3.3 to 33 ft/sec
- Repeatability: ±0.2%
- Temperature range: -4° to 140° F
- Outputs: 1 analog, 3 open collector
- Electronics: Wall mount
KEY BENEFITS
SLF-100
For pipe or tube diameters of up to 3/4 inches
The SLF-100 Series ultrasonic clamp-on liquid flow meter is an accurate, reliable and cost-effective flow measurement instrument capable of measuring low flow rates through small diameter PFA tube without altering the piping. Typical applications are DI water and chemicals in the semiconductor market or any installation when it is preferable not to have an instrument exposed to the process fluid.
QUICK SPECS
- Designed specifically for 3/8, 1/2 and 3/4 inch PFA tubing
- Accuracy: ±2% of reading from 3.3 to 33 ft/sec
- Repeatability: ±0.2%
- Temperature range: 50° to 140° F
- Outputs: 1 analog, 1 open collector
- Electronics: Panel mount
KEY BENEFITS
COMPATIBLE FLOW METER ELECTRONICS
- All Flow Technology ultrasonic meters are sold as a system including appropriate electronics