IN-LINE ULTRASONIC FLOW METERS

The Q Series of inline ultrasonic flow meters are specifically designed for applications that require excellent accuracy and reliability at an economical price point.

Q Series - inline ultrasonic flowmeters
Inline ultrasonic flowmeters for low viscosity fluids

IN-LINE ULTRASONIC METERS - QCT_PA12

The QCT_PA12 Series in-line ultrasonic flow meter has been specifically designed for applications requiring excellent accuracy & reliability at an economical price point. The compact QCT_PA12 Series has no moving parts, non-wetted sensors, and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy and repeatability are achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured. The small footprint, lightweight device is ideal for low viscosity liquid applications including water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

QUICK SPECS

  • Designed for 1/8″ to 2″ piping
  • Accuracy: +/- 0.5% of reading plus zero stability
  • Repeatability: +/- 0.2% over 10:1 calibration range
  • Temperature range: -10° to 80° C (14° to 176° F)
  • Outputs: Analog 4-20mA, Scaled Frequency 0 to 8000 Hz, Modbus RTU over EIA485

KEY BENEFITS

No moving parts
Low pressure drop
High accuracy
All plastic construction
Compact lightweight design
IP66 / NEMA 4X
In-line liquid ultrasonic flow meters QCT Series

IN-LINE ULTRASONIC METERS - QCT_12CF

The compact QCT_12CF Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy and repeatability are achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

QUICK SPECS

  • Designed for 1/8″ to 1″ piping
  • Accuracy: +/- 0.5% of reading plus zero stability
  • Repeatability: +/- 0.2% over 10:1 calibration range
  • Temperature range: -10° to 80° C (14° to 176° F)
  • Outputs: Analog 4-20mA, Scaled Frequency 10 to 5000 Hz, Modbus RTU over EIA485

KEY BENEFITS

No moving parts
Low pressure drop
High accuracy
All plastic construction
Compact lightweight design
IP66 / NEMA 4X
Product grouping of QEM inline ultrasonic flowmeters

IN-LINE ULTRASONIC METERS – QEM

The QEM Series in-line ultrasonic flow meter has been specifically designed for applications that require excellent accuracy & reliability at an OEM price point. The compact QEM Series has no moving parts; this results in a very rugged, reliable and accurate flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its plastic and stainless steel construction makes it the meter of choice for many corrosive fluids.

QUICK SPECS

  • Flow rates to 65 gpm, 3/4″, 1″, 1-1/4″
  • Accuracy: Uncalibrated, +/-2% of reading typical over a 10:1 turndown
  • Accuracy: Calibrated, +/-0.25% of reading plus zero stability over a 20:1 turndown
  • Repeatability: +/-0.10% over 20:1 turndown
  • Temperature Range: -10° to 80° C (14° to 176° F)
  • Outputs: Analog, Scaled Frequency and Modbus RTU over EIA485

KEY BENEFITS

No moving parts
Low pressure drop
High Accuracy
IP66 / NEMA 4X
Compact lightweight design
QLF Ultrasonic Inline Flowmeter for Low Flow Rates

IN-LINE ULTRASONIC METERS – QLF

The QLF Series in line ultrasonic flow meter has been specifically designed for low flow rate applications that require excellent accuracy & reliability. The compact QLF Series has no moving parts, non-wetted sensors and no obstructions in the flow stream to cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

QUICK SPECS

  • High accuracy
  • 3500:1 turndown
  • Minimum flow 0.001 gpm
  • No moving parts
  • Compact & lightweight design
  • Low pressure drop
  • All plastic construction

KEY BENEFITS

No moving parts
Low pressure drop
High accuracy
All plastic construction
Compact lightweight design
IP66 / NEMA 4X

© 2020 FTI Flow Technology. All Rights Reserved.

 

Log in with your credentials

Forgot your details?