TURBINE FLOW METERS
Flow Technology has turbine flow meters for a wide range of industries.
FT Series turbine flow meters utilize a proven flow measurement technology to provide exceptionally accurate and reliable digital outputs. Because of their versatility, these turbine flow meters are the solution for a wide variety of liquid and gas flow sensing applications.
Turbine flow meters are an ideal solution when high accuracy, compact size, fast response, and high tolerance to shock and vibration are critical requirements. Turbine flow meter sizes range from 3/8 inch to 4 inches.
FT SERIES
For process applications and test & measurement applications.
FT Series turbine flow meters offer unparalleled versatility for various applications, including automotive and aerospace test stands, subsea control systems, and feedback and control systems on aeroderivative turbine generators. These meters are also ideal for general industrial flow measurements. With a comprehensive selection of bearings, end connections, calibrations, and electronics, FT Series flow meters are designed to meet the diverse needs of multiple industries, making them the top choice for reliable and accurate flow measurement.
QUICK SPECS
- Designed for a wide range of liquid and gas applications
- Accuracy: ±0.25%
- Repeatability: ±0.05% (liquid) and ±0.1% (gas) of reading.
- Excellent speed of response
- Linearity: ±0.1% (100:1) with linearizing electronics
- Liquid Flow Rates: 0.03 to 1,500 GPM (0.11 to 5,677 LPM)
- Gas Flow Rates: 0.09 to 1,500 ACFM (2.55 to 42,480 ALPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- End Fittings: NPT, AN (MS), Hose Barb, ANSI Flanges, SAE, Tri-Clamp
- Max Pressures: 2000 Bar (30,000 psi), dependent on size and fitting
- Custom engineered solutions available on request
- Optional pressure port tap available
HS SERIES
Turbine meter for high shock load applications
HS Series “high shock” turbine flow meters are engineered to endure pressure spikes that cause hydraulic shock waves, commonly occurring when actuators or rams are activated. This water hammer effect can damage other turbine designs by dislodging internals or shearing rotor blades. The HS Series, built on the proven FT design and delivers the same high accuracy while featuring a ruggedized housing and reinforced rotor, is specifically designed to withstand fluid shock and prevent potential damage.
QUICK SPECS
- High line pressures and hydraulic shock load applications
- Accuracy: ±0.25%
- Repeatability: ±0.05% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Flow Rates: 0.03 to 450 GPM (0.1 to 1,700 LPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- End Fittings: NPT, MS, SAE 4-Bolt and Dynamic Beam Seal
- Operating Pressure: Size and end fitting dependent
- Custom engineered solutions available on request
KEY BENEFITS
SA SERIES
Turbine flow meter for sanitary applications
Flow Technology’s sanitary turbine flow meter offers unmatched accuracy, versatility, and cost-effectiveness for measuring a wide range of food, beverage, and pharmaceutical products. Leveraging over 50 years of experience, Flow Technology designs and manufactures durable sanitary turbine flow meters with a smooth, crack- and crevice-free finish to prevent bacteria growth and ensure the highest level of hygiene in critical applications
QUICK SPECS
- Designed for sanitary applications
- Accuracy: ±0.25%
- Repeatability: ±0.1% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Flow Rates: 0.1 to 250 GPM (0.38 to 946 LPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- Housing Surface Finish: Electropolished – 25Ra
- End Fittings: Sanitary tri-clamp
- Bearings: Ceramic journal
- Withstands clean-in-place (CIP) and sterilize-in-place
FTO SERIES
Turbine flow meter for liquid or gas low flow applications
The Omniflo® turbine flow meters utilize a low frictional drag bearing in a tangential design allowing the measurement of very low flow rates in either liquid or gas. These high resolution, low flow sensing instruments are capable of measuring flow rates as low as 0.001 GPM in liquids and 0.0015 ACFM in gasses.
QUICK SPECS
- Low flow instrument grade flow meter for both liquid and gas
- Accuracy: ±0.25%
- Repeatability: ±0.1% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Liquid Flow Rates: 0.001 to 2.0 GPM (3.78 to 7,570 mLPM)
- Gas Flow Rates: 0.0015 to 0.3 ACFM (2.55 to 510 ALPH)
- Materials of Construction: 316 SS housing and 17-4PH SS rotor
- End Fittings: Female NPT, AN (MS), and ANSI Flanges
- Bearings: Pivot (sapphire jewel), ball, and journal
- Compact Size: 3 inch face-to-face with NPT and MS connections
- Custom engineered solutions available on request
KEY BENEFITS
COMPATIBLE TURBINE FLOW METER ELECTRONICS
- microLinK Smart Pickoff
- microLinK Display
- Amplifier Link
- CA04 & PA04 Signal Conditioners
- TWA Flow Transmitter
- Linear Link (LA & LN)
- Linear Link TCI (LAT & LNT)
- BR3000 Battery Powered Rate / Total Display
- MR1000/MB1000 Series Mini Rate Totalizer/Batch Controller
- SL9000/SL9100/SL9200 Series Flow Computers